OFFICE ZONE HVAC ENERGY CALIBRATION FROM EASILY AVAILABLE SENSOR DATA
ASHRAE. 2002. ASHRAE Guideline 14 - measurement of energy and demand savings. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta, GA.
Brounlee, AlexanderE.I.,and Jonathan A.Wright.2015. “Constrained, mixed-integer and multi-objective optimisation of building designs by NSGA-II with ﬁtnessapproximation.” Applied Soft Computing.
EnergyPlus. 2015. Engineering Reference. ”https://energyplus.net/sites/all/modules/ custom/nrel_custom/pdfs/pdfs_ v8.4.0/ EngineeringReference.pdf
Jimmy Besterberg, Staffan Andersson, and Thomas Olofsson. 2014. “Robustness of a regression approach, aimed for calibration of whole building energy simulation tools.” Energy and Buildings
Joshua New, Jibonananda Sanyal, Mahabir Bhandari, and Som Shrestha. 2012. “Autotune E+ building energy models.” In Proceedings of the 5th National SimBuildofIBPSA-USA,InternationalBuildingPerformanceSimulationAssociation.
Paul Raftery, Marcus Keane, and James O'Donnell. 2011. “Calibrating whole building energy models: An evidence-based methodology.”
Ralph T. Muehleisen, Brian Craig, Daniel Macumber Elaine Hale, and Jason Turner. 2014. “Integration of the CEN/ISO monthly building energy model into OpenStudio.” ACEEE Summer Study on Energy EfﬁciencyinBuildings
Robertson,Joseph,and Ben Polly. 2013. “Evaluation of automated model calibration techniques for residential building energy simulation.” Technical Report,National Renewable Energy Laboratory(NREL).
Shengwei Wang, Chengchu Yan, and Fu Xiao. 2012.
“Quantitative energy performance assessment methods for existing buildings.”
Sun, Jian, and T. Agami Reddy. 2006. “Calibration of building energy simulation programs using the analytic optimization approach (RP-1051).” HVAC and R Research.
Yeonsook Heo, Ruchi Choudhary,and Godfried Augenbroe. 2012. “Calibration of building energy models for retroﬁt analysis under uncertaint.” Energy and Buildings 47.
- There are currently no refbacks.